WHOLESALE SOFT COOLER BAG MANUFACTURER

The duration a soft cooler stays cold depends on various factors, including the quality of insulation, the ambient temperature, the type and amount of ice packs or ice used, and how frequently the cooler is opened. Soft coolers are generally designed to keep contents cool for a shorter duration compared to hard-sided coolers, but they are still effective for more than 12 hours. Here are some general guidelines:

1. Quality of Insulation: Higher-quality soft coolers often have better insulation, which can extend the time they keep items cold. Look for coolers with thick, well-insulated walls. Everich wholesale cooler bags are made of high-quality material and can keep cold and warm for more than 24 hours.
2. Ambient Temperature: Warmer ambient temperatures will cause the ice to melt more quickly. If you are in a hot environment, the cooler will likely stay cold for a shorter duration compared to a cooler used in a cooler environment.
3. Type of Ice Packs or Ice Used: The type and amount of ice packs or ice you use will affect the cooling duration. Reusable ice packs and high-quality gel packs tend to last longer than loose ice, and they won’t create a mess as they melt.
4. Pre-chilling: Pre-chilling the cooler and its contents before use can extend the cooling time. If possible, store the cooler in a freezer overnight before filling it.
5. Frequency of Opening: Each time you open the cooler, warm air enters, and cold air escapes. Limiting the number of times you open the cooler can help maintain a colder temperature for a longer period.
6. Proper Sealing: Ensure that the cooler is sealed properly to prevent air exchange, which can impact its ability to retain cold temperatures.

As a general guideline, a well-insulated soft cooler can keep items cold for approximately 12 to 24 hours. However, this can vary based on the factors mentioned above. It’s always a good idea to check the manufacturer’s recommendations for your specific soft cooler model, as they may provide more precise information on expected cooling durations.

1. Preparation: Before using the cool bag, make sure it is clean and free from any lingering odors. If needed, wipe it down with a mild soapy solution and rinse it thoroughly. Allow it to air dry completely.
2. Chill the Bag: For optimal performance, pre-chill the cool bag by placing it in a freezer for a few hours before you plan to use it. This helps to enhance its insulating capabilities.
3. Select the Right Ice Packs: Choose the appropriate ice packs or ice substitutes for your specific needs. Gel packs, ice packs, or frozen water bottles are common options. Avoid using loose ice, as it can create a mess as it melts.
4. Pack Items Properly: Pack your items in the cool bag, placing the coldest items at the bottom. This helps in maintaining a consistent temperature throughout the bag.
5. Use Insulation: Consider using additional insulation layers if you have them. Wrapping items in towels or using extra padding can help maintain the temperature inside the cool bag for a more extended period.
6. Seal the Bag Tightly: Ensure that the cool bag is sealed tightly to prevent warm air from entering and cold air from escaping. Most cool bags come with zippers or Velcro closures. Double-check the seal to avoid leaks.
7. Avoid Opening Frequently: Minimize the number of times you open the cool bag, as each opening allows warm air to enter and compromises the internal temperature.
8. Keep it in the Shade: Whenever possible, keep the cool bag in a shaded area or covered with a towel or blanket. Direct sunlight can increase the temperature inside the bag.
9. Replenish Ice Packs: If your outing lasts for an extended period, consider bringing extra ice packs or frozen items to replace melted ones and ensure that the contents remain cool.
10. Clean and Dry After Use: After using the cool bag, empty it, clean it if necessary, and allow it to air dry before storing it. This helps prevent the growth of bacteria and mold.

Yes, you can put ice in cooler bags. In fact, using ice or ice packs is a common and effective way to keep the contents of your cooler bag cool. Moreover, it’s often more convenient to use reusable ice packs rather than loose ice. This helps prevent water leakage and keeps your items dry. While you can use loose ice, it’s generally less practical as it can create a mess as it melts.

Here are a few tips when using ice in a cooler bag:

1. Pre-ce Cooler Bag: For better cooling performance, pre-chill the cooler bag in a freezer before loading it with ice and your items.
2. Layering: Place the ice packs or loose ice at the bottom of the cooler bag. This helps cool the entire contents evenly.
3. Seal the Bag Properly: Make sure the cooler bag is sealed tightly to prevent warm air from entering and cold air from escaping. Proper sealing helps maintain the internal temperature for a longer period.
4. Monitor and Replace Ice: Keep an eye on the ice inside the cooler bag. As it melts, consider replacing it with fresh ice packs to maintain a consistently cool temperature.
5. Avoid Overfilling: Leave some space in the cooler bag for air circulation. Overfilling can reduce the effectiveness of the cooling process.
6. Use Insulation: If possible, use additional insulation layers such as towels or blankets to further enhance the cooler bag’s performance.

Remember to follow the cooler bag manufacturer’s guidelines for your specific cooler bag, as some bags may have unique features or recommendations for optimal use.

Our MOQ is flexible and can be negotiated, giving you the highest flexibility in the testing market. We will calculate the cost correspondingly, hoping you can place large orders after checking the quality of our products and know our service. Please feel free to contact us, we will respond fast to your request.

Sure. We usually provide existing samples for free, but a little sample charge for custom designs. Samples charge is refundable when the order is up to a certain quantity.

We usually send samples by FEDEX, UPS, TNT, or DHL. If you have a carrier account, it will be fine to ship with your account, if not, you can pay the freight charge to our Paypal, we will ship with our account.

It takes about 2-4 days to reach. If you want your own designs, it takes 5-7 days. Click here to get a sample now!

Of course, we are professional in OEM/ODM projects and we protect all the designs of every client, we will sign NDA if needed to ensure that we won’t send your artwork to any other clients and won’t sell your OEM items to anyone else. Any questions please send us your inquiry.